Here are some technical memos that explain how to use CarSim, TruckSim, and BikeSim for some basic tasks. All are portable document format (PDF) files.
|Running a VS Vehicle Model in Simulink||June 2011||Download||12-page tech memo explains how a vehicle model from Mechanical Simulation is set up to run in a Simulink model. It uses an ABS example similar to the ones installed in CarSim, BikeSim, and TruckSim.|
|Running Multiple VS Vehicles in Simulink||June 2011||Download||9-page tech memo explains how multiple vehicles can run simulataneously and interact in Simulink, using an example similar to the ones installed in CarSim, BikeSim, and TruckSim.|
|Making Advanced Procedures with VS Commands||Nov. 2011||Download||25-page tech memo explains how VS commands and support tools are used to automate compliocated test procedures. The example used is an ISO circular turning test.|
|Sine with Dwell Test in CarSim||Dec. 2011||Download||34-page tech memo explains how VS commands are used to simulate the sine with dwell test specified in regulations such as ECE R13H and FMVSS 126 that are used to certify the performance of electronic stability control (ESC) safety systems on new vehicles.|